|
View Full Version : Wiring a Photocell and 2 lights Vinesh 12 February 2004, 18:32 How would I wire the above? I already have the live wire and fused spur switch. I'm not too sure with the connection side. sparkykev 12 February 2004, 20:25 Go from the fuse spur to the photocell with you 3 core cable, then from the photocell to your 1st light, then a cable from the 1st to the second light. The connections in the photocell will proberbly be L OR L in, N for your neutral, L1 or L out. The red from your spur will go in L, The red to your light will go in L1, put both blacks in the N term.Dont forget to connect the earths, you may need a seperate connector for them. Vinesh 12 February 2004, 21:16 Cheers mate mj 12 February 2004, 22:27 what type of lights are they? check the contact rating of the photocell - especially if you are using halogens. cheers, mike. Vinesh 13 February 2004, 21:22 They are 2 Micromark brick walllights, 9w each. mj 14 February 2004, 10:34 :D - you should be ok then ;) |