I have an Apexi power fc(stand alone ecu) and also a boost control kit(under bonnet wiring,pipes,solenoid and map sensor)
Both items are still boxed/never used.Cost me £900 ,sell for £600.
CALL ON 07970 546405
This is sold

this thread is almost a year old,please dont pm or call me on this

[Edited by dij - 1/11/2004 10:40:14 PM]

Im not sure if they'll fit v4 but been told will fit v6 sti.
Anyone got any idea if they will work on UK models? (with built in immobolisers in th ecu or transponder key)

fitting is fairly simple, but remapping is needed by trained technicians.RC developements or Abbey motorsports can help.
CAN WARN YOU OF DETTING,INCREASE BHP,BOOST,TORQUE...........OK THATS ENOUGH
Im sure you get the point.

is anybody there?

[Edited by dij - 1/21/2004 11:48:40 PM]

BTTT

Any decent offer?

I have a my98 wrx import any idea if it will fit this? If so consider it sold as I was buying one very soon

Would this work on a uk99,if so I'm interested.

I think there is a good possibility of fitting either car.Led to believe ther is some wires that may need to be changed around on the main ecu plug.
Im sure this has been discussed recently in a thread.

Neil
if your wrx is a model with the later spec dash and digital ecu,then this may be a direct fit .Also is the coil pack slightly to the left of the car?the last wrx and sti classics have the same wiring and injector setup.

sorry Scott no commander,but been told theyre not to much or to difficult to get.
I wouldnt know what to do with it anyway,the last time i messed with map or boost settings on my mates supra tt i fcuked it rite up.

TOP

If it helps ....


Type Year system Engine type ECU Item # Commander Item # Boost control Kit #
GC8/GF8 (A - C type) 92/11 - 96/9 EJ20G 414-F001 415-N001 415-A001
GC8/GF8 (D - E type) 96/9 - 98/9 EJ20K 414-F005 415-X001 415-A001
GC8/GF8 (F - G type) 98/9 - 00/8 EJ207 414-F003 415-X001 415-A013


[Edited by BoxerFlat4 - 1/13/2004 9:00:59 PM]

Is that the AVC-R boost controller ?

No sorry, just boost control solenoid,map sensor ,wiringpipes etc
its not a unit that sits inside tha car with knobs/buttons(the boost control kit)
or a screen/display.

This is a highly recomended uppgrade,especialy on sti models.
Jap imports are prone to detting due to the lower octane in british fuel.
This unit can adjust fueling to suit 97ron fuel.
It will also give you shick loads of power on top end and mid range (higher boost pressure.


A 'must' on cars that have been de catted fully.

Anyone?

Im considering using this ecu on my own car
would anyone be interested in a factory STi V5 ecu?
????????
????
Still prefer to sell FC spose

Unless I come across another lady driver in an M3 e46
at the traffic lights
You #itch

remapping is needed by trained technicians.RC developements
:rolleyes:

[Edited by alanjack - 1/20/2004 7:03:56 AM]

Which model is it? Boxer flat fours entry tells which models apply to which cars.Still interested

Going by that info it is this one:

GC8/GF8 (D - E type) 96/9 - 98/9 EJ20K 414-F005 415-X001 415-A001

Although it is supposed to be for a 1999 model.

The part no on the box is :414 F005
?????????


[Edited by dij - 1/20/2004 6:54:52 PM]

anyone fitted one of these before?
How much power did you gain?
any problems?

Come on someone
There must be a scoob in need of of this kit

I will take £550 inc post

now thats gotta be worth it

BTTT

hi,

i am lookinf for one.
need to know all serial number on the ECU
because , i have a 99
(99-00 and 97-98 are different !)

bebeu@free.fr

The serial number is
414 F005
I purchased it for a 1999 STi 5

so its not for 99 :(



GC8/GF8�iD�`EŒ^�j 96/9�`98/9 EJ20K 414-F005


GC8/GF8�iF�`GŒ^�j 98/9�`00/8 EJ207 414-F003



:(

Well actually
as far as I am concerned it is for a 99/00
that is what I was told when I baught it

you see that is not possible

so try ECU on your car

or if you live near France, we can try on my car.