Going to get a pair of the 605se's as everyone on here raves about them but what of the tweeters i have not seen them mentioned, do they just fit in and replace the excisting one's...?

Existing Ones? What existing ones , my scoob never had tweeters fitted to it, if you mean in the grill next to the door handle that is. I have the 605's fitted and the tweeters are fitted on the small triangular bit next to the window, bit of a bugger to fit there but they lift the sound field up that little bit higher.

I have a MY98 UK Turbo and there are allready tweeters in the door handle souround....

Someone must have fitted 'em - they don't come as standard. There is a Subaru tweeter kit that is laughably priced at 99 quid...

The 605s shoudl come with woofer, tweeter and x-over.

Must be the subaru kit then as they plug into a socket in the door panel.......

So is there a better option considering i already have tweeters by just fitting the mids or will the infinity tweeters replace the existing ones....

Fit the infinity tweeters , they will almost certainly sound better then your existing ones, the infinitys do come with Woofer,tweeter and x-over with a 0db and -3db for the tweeter mine are on -3db to kill a little harshness. People have fiited the mentioned tweeters behind this grill using duct tape, but this seems a rather crude way to fit ICE, much prefer the earlier method that i mentioned.

NONONONONO YOU CANNOT JUST FIT TWEETERS!

Sorry to shout, but if you try to just plug a tweeter into that cable, you'll blow 'em as soon as you put a signal there.

You need to add a crossover and tweeter.

Sorry chaps . half asleep last night you MUST use a x-over with tweeters otherwise same as chiark says it will be goodbye tweeters.

To hijack this thread slightly, I am doing the same thing, but in a MY02, which does have tweeters installed already too.

In the factory install, would there not also be a crossover that would require removing first, before fitting the one that comes with a set of components, or by removing te factory tweeter am I also removing the factory crossover?

I suspect I amy be answering my own question here but on further examination, the factory tweeter has a capacitor attached which I am assuming works as a simple crossover. When this is removed I assume I can connect my new tweeter (inlcuding new crossover of course).

cheers

Steve

When I had a Rover 200 (don't laugh) it had empty tweeter grills in the panel by the door latch, I got the factory twitters as they clicked nicely into place and were more or less where they needed to be.

They had the capacators already attached so I was able to just splice them onto the existing cable to the main speakers.

Suprising how much difference they made.

Dave