Right, after 3 hours slog and much picture taking, Fizz and I managed to install the first pod-mount SECS1003 in a "Classic" scoob. The full fitting storyboard will appear in a PDF download on the www.psi3.co.uk website soon.

Squizz's SECS1003 pod-mount...Up and running! <phew>


Fizz's MY01 Silver finish SECS1001 - Looking good






[Edited by Squizz - 1/19/2003 5:04:02 PM]

 

The one on the classic looks excellent

Just hope I can get one for my MY98

Squizz, any chance of getting a pic of the area where you connected the SECS1003 to on the classic Impreza?

Cheers,

Gavin



[Edited by Gavin G - 1/19/2003 5:14:39 PM]

 

Looks good

simon

 

That photo is a bit dark, but the rest of the fitment photos are of much better quality.

Gavin - The connector is plugged in at the bottom of the steering column and slightly to the right. There is a picture of the plug being connected on the forthcoming fitment document. Expect to see it on the www.psi3.co.uk website by the middle of the week.

<Mental note - annotate the photographs, describing what we did >

BTW - This involves a lot of hacking of your original oddment bin, there's no going back once you've got a certain way in!!

Simon/PCB - Cheers, mate. Fizz and I are very pleased with our units. The stock photos we took on Saturday look really good, too. They'll be on the site in a couple of days.

 

is the pod in the classic impreza made like that or is it a one off jobbie? if its in production how much for the pod and the SECS?

Simon
Impreza GT MY00

 

Also about the Blue buttons on the thingy are they backlit or
do they come in other color...???

Simon
Impreza GT MY00

 

Simon, the picture shows how the pod comes, complete with the SECS unit fitted, price for pod and unit is £325 + vat full details on our website.

Buttons are not backlit, button colour options are Blue, Black, Red or Grey.

simon

 

im on the PSI3 website and i am wondering what is the diffrence between the secs: S1001,S1002 and S1003 ???
Will it fit my car?

Simon
Impreza GT MY00

 

Simon,
S1001 is single DIN fitment as shown in the picture above of the silver faced unit.

S1002 is the standalone unit, which can be surface mounted anywhere.

S1003 is the PRE '01 pod mount. ( Probably the best option for your car)

simon

 

Simon

Great looking unit mate.

How much is the Defi Shift light including modification ?

Cheers

Nathan..


[Edited by Nathan L - 1/24/2003 6:00:31 PM]

 

dont see the my98 on the site....is it avaiable or is the fitment for my99 the same btw how easy is it to fit i can see it give quite a few readings are they directly through the ecu sorry if its a daft question???? but not exactly very technical
hawk

 

Both looking very nice

Squizz - does it have a sensor to warn you of asylum seekers hiding in your backbox?

Dan

 

No Dan.

It doesn't tell me about myopic female demolition experts with a fetish for wing-mirrors, either!

 

That looks like excellent guys - from the photo's of the classic, almost OEM fit.

 

www.psi3.co.uk use Subaru OEM parts wherever possible.

The pod pictured and its skeleton mount are Subaru OEM parts. The extra sensors for oil pressure/temperature on future units will be genuine parts also.

 

Wondering what unit is best for me...

I have a MY00, but don't want to destroy the centre pod unless I have to. The stand alone one had been ideal, if it hadn't lacked some of the features of the other ones...

Is it possible to remove the center pod unit from the pod, and mount it somewhere else? It looks like it's a bit smaller than the single DIN unit, so I might be tempted to get a pod-unit and mount it as a stand alone

BTW, does anyone know why the stand-alone unit lacks the external inputs/outputs og the other units?

-Torstein

 

Nathan L, modified defi indicators are £35, EGT needs seperate sensor, all units available from stock.

Hawk, MY98 should be the same as MY99 provided you have the 16 pin diagnostic socket, i will confirm this later in the week.

Torstein, full fitting instructions for the pod mount will be on our site this week.

simon

 

Any Ideas how long a MY94 option will be available??

Can't wait..

Cheers
Scott

 

Cheers Simon

Nathan..

[Edited by Nathan L - 1/24/2003 5:59:33 PM]

 

is the EGT sensor available for secs 1003???

Simon
Impreza GT MY00

 

The SECS1003 (pod-mount) Fitment Guide document is now available on the www.psi3.co.uk website, as are photographs of the various units and options.

 

So if I fit a Dawes Device I can see exactly how much more boost I dialing in. Is that correct?

 

Now that's a good question... I wanted all the diagnostic info, as the Dawes was my next logical step after a de-cat downpipe.

Does the Dawes fool the ECU into thinking it's producing less boost than it is? I'll try and find out in "Drivetrain".

[Edited by Squizz - 1/24/2003 4:01:09 PM]

 

That looks so sexy. I'll add it to my shoping list for my MY01.

Gordo

 

that unit looks great tried site with no luck. what does it read and hoe much does it work out fitted

 

Yup, the Dawes can be fitted to leave the sensor connected thus giving a true boost reading that includes augmentation by the device itself. That also means the original ECU Fuel Cut remains as a saftey feature...

So I'm getting one soon.

 

Now I gota save some pennies for this. Got the Dawes but didn't want to put it on yet.

 

I've bought and fitted one of these with the optional shift light, its a good bit of kit and looks cool in the dash.

Nathan..

 

More pictures -

More SECS!!!

 

squizz you work @ secs right?
email me simonsubaru@hotmail.com and make me a deal for 2 1003 units

Simon
Impreza GT MY00