I posted a thread in General and General Tech and despite a number of responses no one has been able to answer my question.
I require a live feed, (ONLY WHEN THE IGN SW IS IN THE RUN POSITION).
This is to feed defi gauges that have a warning buzzer and they are wired to the accessory circuit. So if I want to listen to the radio/cd this warning buzzer sounds, hence a request for a take off point in the loom only in the run position.
See (if you gents would be so kind) my thread and responses in general tech.
Thanks Bob

 

What I did was look behind the fusebox, get a test lamp out and find the right thing to tap into.

 

I have posted one work around solution on your original thread.

 

Thanks Matt, it`s a good tip for the time being but not the real solution. I dont seem to have got a very good response on this topic, and I would have thought with 19,000 members someone would know!..It looks like...back to the avo but it`s cold and wet out there..
Thanks agn, Bob

 

if you look in the o/s sill wiring loom you will find the fuel pump feed wire which depending on year of vehicle should be something like a black/white witn silver bands of about 2.5 mm in diameter.use a test light to make sure....