|
View Full Version : Anyone know of an STi7 style bonnet scoop for an MY99 DaveW 10 March 2002, 20:38 You mean like this... http://upload.turbosport.co.uk/gallery3/2002328224721322735.JPG DaveW. [Edited by DaveW - 10/3/2002 7:39:56 PM] mega_stream 28 September 2002, 17:34 After a bigger scoop, STi7 style to get some more cold stuff in :) Does anyone do one? Devil's Refugee 30 September 2002, 13:29 Oi, stop hijacking my threads ;) Have asked a similar question on the General Section too. Posted an e-mail off to TSL as well since they sell them. Devil's Refugee 30 September 2002, 13:32 Just spoke with TSL. The larger STI 7 scoop doesn't fit classic Scoobs. Also, they said that if the scoop was any larger, then air flow could possibly direct airflow over the IC rather than into it. :( mega_stream 30 September 2002, 15:45 Damn and bugger :( Who was making that Intercooler spliter thang that fitted inside the scoop to direct the air inside. ozzy 30 September 2002, 15:57 http://www.scoobynet.co.uk/bbs/thread.asp?threadid=136539 Is there an echo in here ;):D Stefan mega_stream 30 September 2002, 20:09 This echoe's come back with a link ;) http://freespace.virgin.net/michael.ferries4/splitter.htm Good ol' search :D HKSubaru 03 October 2002, 18:16 wondered what that was. what does it actually do? allow it to fit on a MY99 to pass air through better? Dyney 04 October 2002, 12:35 I borrowed a std WRX scoop and trial fitted it to a MY97. (A WRX scoop will have the same fixings as an STI7 scoop;)) It does sort of fit:) but leaves gaps at the front corners and would need triming at the rear corners to fit flush! Some of the bolts/clips line up with a bit of adjustment:D I'll try it again later and this time I'll remember the digi cam!!!!:rolleyes: Iain. mega_stream 04 October 2002, 16:15 OMG :eek: That cars got ChristianR's Rare* S201 Bi-Level Rear Spoiler with clear LED brake light! :D Looking :cool: by the way :D Dyney 08 October 2002, 12:02 Heres the pics (finally!) This is a MY02 WRX scoop (same base size as STI7 scoop). As you can see the front corners are too shallow and the rears too tight and would need trimming. http://upload.turbosport.co.uk/getpic.asp?File=2002108115644428859.JPG http://upload.turbosport.co.uk/getpic.asp?File=2002108115644408317.JPG A few of the mounting holes line up but not enough for a direct fit. Iain. barge 08 October 2002, 14:49 looks like a job from someone like Rob at MRO styling. I did ask him about a bigger & longer scoop a few weeks back. JIM THEO 09 October 2002, 08:49 I am also inerested about this Iain, keep us informed. It would be nice if MRO could support an upgrade for the standard bonnet scoop as all the pre MY01 cars suffer from air flow through the I/C. I listened that the scoop you try makes things worse, I don't know why, but if I remember right the source was TSL Performance! Cheers JIM |