I'm confused. I'm about to install a Turbo Gauge, however I am confused where to tap into to get the boost reading. I've read Chiarks page and can not find the outlet on the top of the manifold ( I have a MY01 WRX)he suggests. Have also looked at the Subaru Install instructions Here (https://ssl.autocenter.net/webparts/acatalog/page1.html) but on these instructions it look like you tap into the FPR Page3 (https://ssl.autocenter.net/webparts/acatalog/page3.html). Therefore any help (with pics if possible) would be helpful.
Cheers
StuBoy

BTT

Whatever a torbo gauge is, I want one too!!!

when you install the proper subaru kit it says to plumb it in to then pipe that goes from the bov on the intercooler to the manifold. it gives you a t piece and says cut the pipe 50mm from the manifold end and install the t piece. i dont know how accurate the cutting has to be or why that distance but i do as it says and have never had a problem .